|
Post by SNOtwistR on May 3, 2017 9:51:26 GMT -5
I am building a complete system for display at the Atlantic Truck show. This is based on the Winmate 8" Tablet Intel 3170n 4gig ram, 64gig, SSD BT, Wi-Fi, GPS/GNSS, 3/4G IPS screen. HD Radio, XM radio, All-in One Box. The goal for this build is to demonstrate the full capabilities of Driveline and the CarPC benefits in todays trucking industry. I am going to make this demonstration board with relay controlled lights to simulate headlights, parking lights, front view camera, parking sensors for front and rear, TPMS, Phidgets analog inputs and digital input/outputs, OBD2 engine diagnostics via simulator, Bluetooth phone support using iPhone and all uploading to the tracking platform. I will post as I go with installation and configuration pictures. SNO 8" Tablet
|
|
|
Post by COMpulse on May 3, 2017 10:53:09 GMT -5
I can't wait to see it come together.
|
|
|
Post by philg on May 3, 2017 13:52:03 GMT -5
Subscribed!!!!!!!!!
|
|
|
Post by SNOtwistR on May 4, 2017 11:58:44 GMT -5
Here is the layout mostly in place and correct position.
|
|
|
Post by philg on May 5, 2017 8:48:48 GMT -5
Nice!
How about posting a schematic at some point?
|
|
|
Post by SNOtwistR on May 8, 2017 11:25:59 GMT -5
Here is a list of components: 8" Winmate Windows 10 64bit Tablet Intel N3170 4gig ram 64gig SSD BT WiFi GNSS/GPS 3/4G IPS Fingerprint Reader All-in-One Box - Scantool OBD2 Micro OBD200, Phidget 1010 8 analog in, 8 digital in/out, TPMS, GPS, Parking Distance front/rear 2 LED Fog Lights 4 Clearance Lights front/rear 5.1/7.1 USB Sound card XM Radio XMD-1000 with FTDI USB-Serial converter and custom cable HD Radio DMHD-1000 with MJGadgets USB cable Ram Tough USB Hub RAM-234-HUB1U 4 Phidget 1124 Precision Temperature sensors 1 Phidget 1127 Light Sensor 1 Phidget 1125 Precision Humidity/Temperature sensor 1 Phidget 3051 Dual Relay 1 Phidget 3052 SSR Single Relay 1 Phidget 3053 SSR Dual Relay 2 Microsoft LifeCam HD-3000 1 4 position Ignition Switch 1 External GPS Active Antenna 1 Power Antenna (universal) ECUsim 2000 OBD Simulator (scantool)
|
|
|
Post by philg on May 8, 2017 13:49:01 GMT -5
Nice inventory of hardware!
|
|
|
Post by SNOtwistR on Jun 3, 2017 9:51:54 GMT -5
Here is the base getting closer just waiting on usb sound card to add to the blank spot. Most of the wiring is completed on the back and will post that picture soon. SNO
|
|
|
Post by SNOtwistR on Jun 12, 2017 0:32:16 GMT -5
Here is the finished product at the show, running Driveline of course. SNO
|
|
|
Post by rray on Jun 14, 2017 22:58:31 GMT -5
Very impressive display! I see your tracking software too, looks really professional.
|
|
|
Post by philg on Jun 16, 2017 7:10:06 GMT -5
How was the response at the show? Was most of the interest from drivers, O/Operators? or company suits?
|
|
|
Post by SNOtwistR on Jun 16, 2017 9:33:37 GMT -5
Thanks rray, Phil the show was very good about 12,500 people over the 2 days. pretty well even mix of drivers and companies. A lot of interest in the E-logs and driveline as a front-end to do the E-log/tracking and more! I also sold 10 solar powered yard cams too. SNO
|
|